基于ARM处理器的两路超声波测距仪设计
作者:
作者单位:

作者简介:

通讯作者:

基金项目:

市厅级科研计划基金资助项目(HAG09029)

伦理声明:



Two way Ultrasonic Range Finder Design Based on ARM Embeded Processor
Author:
Ethical statement:

Affiliation:

Funding:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    结合嵌入式处理器LM3S1607与超声波传感器设计一种智能超声波测距装置,采用ARM内核芯片LM3S1607的32位嵌入式微处理器与两片P89LPC938单片机和超声波传感器发送与接收模块,通过I2C 串行总线上下位机的通信架构,实现两路超声波测距。通过高精度温度传感器LM75A实现了对超声波测距系统的温度测量,对超声波的声速进行了补偿,提高了测量精度,同时具有LCD液晶显示测试距离,语音播放距离功能。设计和开发了相应的接口电路及应用程序,介绍了两路超声波测距仪的设计方法。

    Abstract:

    Combined with the embedded processor LM3S1607 with ultrasonic sensor, an intelligent ultrasonic distance measuring device is designed in this article. The 32 bit embedded microprocessor of the ARM core chip LM3S1607 is used. Sending and receiving modules are made up of two pieces of P89LPC938 microcontroller and ultrasonic sensors. Communication architecture of upper and lower computer is formed via the I2C serial bus to achieve two way ultrasonic distance measuring. Temperature measurement of ultrasonic ranging system is realized through the high precision temperature sensor LM75A. Ultrasonic sound velocity is compensated to improve the measurement accuracy. Meanwhile the distance measuring device has the function of LCD displaying and voice broadcast test distance. Interface circuit and application program are designed and developed. The design method of two way ultrasonic range finder is also introduced.

    参考文献
    相似文献
    引证文献
引用本文

徐军,孙振伟,王华东.基于ARM处理器的两路超声波测距仪设计[J].压电与声光,2012,34(6):958-962. XU Jun, SUN Zhenwei, WANG Huadong. Two way Ultrasonic Range Finder Design Based on ARM Embeded Processor[J]. PIEZOELECTRICS AND ACOUSTOOPTICS

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2012-11-23
  • 出版日期: