底钉扎与顶钉扎结构在磁传感器中应用研究
作者:
作者单位:

作者简介:

通讯作者:

基金项目:

伦理声明:



Research on Application of Bottom Pinned and Top Pinned Structures in Magnetic Sensor
Author:
Ethical statement:

Affiliation:

Funding:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    该文采用高真空磁控溅射技术分别制备了无缓冲层的NiFe/IrMn和IrMn/NiFe及有缓冲层的IrMn/ NiFe 3种结构薄膜,并用振动样品磁强计对样品磁性能进行测试。结果表明,直接在Si上淀积NiFe/IrMn和在适当厚度的Ta/NiFe或Cu层作为缓冲层上淀积IrMn/NiFe的2种结构,有很大的交换偏置场。这样大的交换偏置场适合应用于顶钉扎和底钉扎结构的自旋阀巨磁电阻器件。

    Abstract:

    Three kinds of structures were prepared by high vacuum magnetron sputtering technology:NiFe/IrMn films and IrMn/NiFe firms without buffer layer;and IrMn/NiiFe films with buffer layer respectively.The magnetic properties were tested with a vibrating sample magnetometer.Result showed that large exchange bias existed both in NiFe/IrMn which was deposited directly on Si,and also in IrMn/NiFe biolayer structure which were deposited on proper thickness of Ta/NiFe Layer or Cu layer. Such large exchange bias was the most suitable for top and bottom pinned spin valve giant magnetoresistance device.

    参考文献
    相似文献
    引证文献
引用本文

杜伟伟,唐晓莉,苏桦,张怀武.底钉扎与顶钉扎结构在磁传感器中应用研究[J].压电与声光,2014,36(4):671-674. DU Weiwei, TANG Xiaoli, SU Hua, ZHANG Huaiwu. Research on Application of Bottom Pinned and Top Pinned Structures in Magnetic Sensor[J]. PIEZOELECTRICS AND ACOUSTOOPTICS

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2014-07-22
  • 出版日期: