应用于智能机翼的压电致动器技术研究
作者:
作者单位:

作者简介:

通讯作者:

基金项目:

伦理声明:



Research on Piezoelectric Actuator Applied to the Smart Wing
Author:
Ethical statement:

Affiliation:

Funding:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    该文针对新型智能机翼翼型变形控制的应用需求,研究了超临界翼型在产生微变形情况下的流谱结构及在10~500 μm微变形条件下翼型的气动特性变化。研制出了用于智能机翼的压电陶瓷致动器:位移量为5~290 μm,最大输出力为200 N,满足智能机翼变形控制需求,验证了压电陶瓷致动器在智能机翼上应用的可行性。

    Abstract:

    In order to meet the application requirements of the wing deformation control of the smart wing, the flow spectrum structure of the supercritical aerofoil profile with microdeformation and the aerodynamic characteristic change under the condition of 10~500 μm of the microdeformation have been studied in this article. The piezoelectric ceramic actuator with the displacement of 5~290 μm and the maximum output force of 200 N has been developed. The proposed piezoelectric actuator can meet the requirement for the wing deformation control of the smart wing. The feasibility of piezoelectric ceramic actuator applied to the smart wing has been validated.

    参考文献
    相似文献
    引证文献
引用本文

周哲,王登攀,张祖伟,王元靖,王露,方鑫,邹学平.应用于智能机翼的压电致动器技术研究[J].压电与声光,2016,38(3):420-422. ZHOU Zhe, WANG Dengpan, ZHANG Zuwei, WANG Yuanjing, WANG Lu, FANG Xin, ZOU Xueping. Research on Piezoelectric Actuator Applied to the Smart Wing[J]. PIEZOELECTRICS AND ACOUSTOOPTICS

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-05-31
  • 出版日期: