杂模抑制薄膜体声波谐振器的仿真分析
作者:
作者单位:

作者简介:

罗恩雄(1997-),男,贵州省黔南州人,硕士生。

通讯作者:

基金项目:

伦理声明:



Simulation Analysis of a Thin-Film Bulk Acoustic-Wave Resonator for Spurious-Mode Suppression
Author:
Ethical statement:

Affiliation:

Funding:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    该文研究了电极边界阶梯结构对薄膜体声波谐振器(FBAR)杂波的影响。采用有限元仿真法讨论了阶梯结构宽度尺寸对杂波的抑制效果,结合振型分析该结构能抑制声波能量的泄露,提高器件品质因数。为了进一步验证仿真结果,实验制备了FBAR器件。测试结果表明,当该阶梯结构凸起宽度为3 μm,凹陷宽度为1.5 μm时,谐振器杂波被有效抑制,反谐振频率处的品质因数约增大100。

    Abstract:

    In this study, the effect of the electrode-boundary step structure on the spurious mode of thin-film bulk acoustic resonators (FBARs) is investigated. The finite-element simulation method is used to investigate the effect of the width dimension of the step structure on the suppression of spurious modes. The step structure is analyzed in conjunction with the vibration pattern to suppress the leakage of acoustic energy and to improve the quality factor of the device. To further verify the simulation results, FBAR devices are experimentally prepared. The results show that when the width of the raised frame is 3 μm and the width of the recessed frame is 1.5 μm, the resonator spurious mode is effectively suppressed and the quality factor at the anti-resonance frequency is increased by about 100.

    参考文献
    相似文献
    引证文献
引用本文

罗恩雄,张必壮,吴坤,马晋毅,李思忍.杂模抑制薄膜体声波谐振器的仿真分析[J].压电与声光,2024,46(2):159-163. LUO Enxiong, ZHANG Bizhuang, WU Kun, MA Jinyi, LI Siren. Simulation Analysis of a Thin-Film Bulk Acoustic-Wave Resonator for Spurious-Mode Suppression[J]. PIEZOELECTRICS AND ACOUSTOOPTICS

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
历史
  • 收稿日期:2023-12-06
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2024-04-19
  • 出版日期: