Miniaturization and high-frequency quartz resonators are being developed, with increasingly smaller sizes.Therefore, it is very important to develop a low-cost precision manufacturing process for quartz resonators.Etching experiments on quartz wafers were conducted to determine the optimal process conditions for precise manufacturingof rectangular resonators.The effects of temperature on the integrity of the metal protective layer and ofetching time on the surface roughness of quartz were studied.The corrosion rate was stable and moderate, whichwas conducive to the precise manufacturing of the resonator.The process flow of the quartz resonator was designedto obtain an ultra-thin rectangular AT-cut high-frequency quartz resonator with good quality.The causes of the errorwere analyzed, and a set of wet etching process with good precision was summarized.It is expected that the thicknessof the rectangular resonator will be reduced to 10 μm or less using low-cost means.